![background image](http://html1.mh-extra.com/html/national-instruments/ni-5105/ni-5105_getting-started-manual_3555417015.webp)
14
|
ni.com
|
NI High-Speed Digitizers Getting Started Guide
1.
Launch MAX by double-clicking the
Measurement & Automation
icon on the desktop.
Figure 10 shows the MAX Configuration Pane.
Figure 10.
MAX Configuration Pane
2.
Expand
Devices and Interfaces
to see the list of installed devices. If you are using a
digitizer with the LabVIEW Real-Time Module, expand
Remote Systems
. Find your target
IP address or name, expand it, and then expand
Devices and Interfaces
.
3.
If your device is not listed, press <F5> to refresh. If the device is still not listed, repeat the
steps in section
5. Installing the Hardware
. For more information about using MAX, refer
to the help files available within MAX.
Note
Windows 8 (64-bit), Windows 7 (64-bit) and Windows Vista (64-bit) do not
support Traditional NI-DAQ (Legacy) devices. Refer to the NI-SCOPE Readme to
determine which operating system is compatible with your digitizer.
4.
Record the device number or device name assigned by MAX. You need this identifier when
you program your device.
5.
Perform a self-test on the device to verify installation.
•
Right-click the device and select
Self-Test
.
•
(Traditional NI-DAQ [Legacy] Devices)
Right-click the device, select
Configure
,
and click
Test Resources
.
A dialog box indicates whether the device has passed the test.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com