CompactRIO™, LabVIEW™, MXI™, National Instruments™, NI™, ni.com™, and NI-VISA™ are
trademarks of National Instruments Corporation. Product and company names mentioned herein are
trademarks or trade names of their respective companies. For patents covering National Instruments
products, refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on
your CD, or
ni.com/patents
.
© 2004 National Instruments Corp. All rights reserved.
323792A-01
Apr04
*323792A-01*
Documentation Resources
Refer to the following documentation for information about the
LabVIEW FPGA Module, R Series hardware, and VIs necessary for your
application.
•
LabVIEW FPGA Module Release Notes—
describes the software
installation and other known software issues
•
LabVIEW FPGA Module User Manual
—describes the LabVIEW
FPGA Module software and techniques for building applications in
LabVIEW with the LabVIEW FPGA Module
•
PXI-7811R User Manual
—describes the electrical and mechanical
aspects of the PXI-7811R device and contains information concerning
its operation and programming
•
LabVIEW Help—
describes the VIs and function reference information
•
CompactRIO R Series Expansion System Installation
Instructions
—describes how to install the CompactRIO R Series
Expansion chassis and CompactRIO I/O modules
Where to Go from Here
Refer to the
LabVIEW FPGA Module Release Notes
for information about
getting started with LabVIEW FPGA VIs and host VIs. This document also
provides examples for verifying that your software and hardware are
properly installed. To access this document, select
Start»Programs»
National Instruments»LabVIEW»Module Documents
.
Table 1.
Cabling Options
Cable
Description
SH68-C68-S
For connecting signals from the DIO connector to the NI SCB-68 terminal
block.
NSC68-5050
For direct connection of the NI 7811R and SSR backplanes.
Routes signals to connectors that attach directly to SSR backplanes.
