![background image](http://html1.mh-extra.com/html/national-instruments/network-device-daq-s/network-device-daq-s_user-manual_3461198144.webp)
Appendix A
Device-Specific Information
A-6
ni.com
Mating connectors and a backshell kit for making custom 68-pin cables are
available from NI.
NI recommends that you use one of the following connectors with the I/O
connector on your device.
•
Honda 68-position, solder cup, female connector
•
Honda backshell
•
AMP VHDCI connector
For more information about the connectors used for DAQ devices, refer to
the KnowledgeBase document,
Specifications and Manufacturers for
Board Mating Connectors
, by going to
ni.com/info
and entering the info
code
rdspmb
.
NI 6124 Specifications
Refer to the
NI 6124 Specifications
for more detailed information about the
device.