![background image](http://html2.mh-extra.com/html/national-instruments/mydaq/mydaq_user-manual_3404952010.webp)
10
|
ni.com
|
NI myDAQ User Guide
Figure 5 shows the DMM connections on the NI myDAQ. Table 2 describes these signals.
Caution
60 VDC/20 Vrms maximum.
Do not
plug digital multimeter probes into
circuits with Hazardous Voltages, such as wall outlets.
Figure 5.
Connections for DMM Measurements
Connecting Analog Input Signals
When configuring the input channels and making signal connections, you must first determine
whether the signal sources are floating or ground referenced. The following sections describe
these two signal types.
Ground-Referenced Signal Sources
A ground-referenced signal source is connected to the building system ground, so it is already
connected to a common ground point with respect to the NI myDAQ device, assuming that the
computer is plugged into the same power system. Instruments or devices with nonisolated
outputs that plug into the building power system are ground-referenced signal sources.
Note
Most laptop computers have isolated power supplies, and are consequently
not connected to the building ground system. In these cases, treat the analog input
signal as floating with respect to NI myDAQ.
1
Connectors for Voltage/Resistance/Diode/Continuity
2
Connectors for Current
Table 2.
DMM Signal Descriptions
Signal
Name
Reference
Direction
Description
HI (V
Ω
)
COM
Input
Positive terminal for voltage, resistance,
and diode measurements
COM
—
—
Reference for all DMM measurements
HI (A)
COM
Input
Positive terminal for current measurements
(Fused: F 1.25 A 250 V Fast-Acting)
1
2
HI
HI
COM
1 A
A
MAX
MAX
60 V
0 V
20 Vrms
20 Vrms
MAX
MAX
A
V
Ω