©
National Instruments Corporation
2-1
PCI-Based MXI-2 Interfaces for Windows 2000/NT/Me/98
2
Setup
This chapter contains the instructions to set up your VXI/VME system
using the MXI-2 hardware and NI-VXI software.
Configuring the Hardware
This section contains basic information about configuring your MXI-2
hardware.
Note
Install the NI-VXI software for Windows before installing the VXI hardware.
The default settings for your MXI-2 hardware are acceptable for most
applications. Refer to Appendix A,
, for a complete listing
of the hardware and software default settings.
The
MXI-2 Configuration Reference Manual
fully describes the
configuration and installation of each MXI-2 board discussed in this getting
started manual. Refer to the
MXI-2 Configuration Reference Manual
if you
want to try a different hardware configuration or would like more
information on a particular setting.
Use MAX to change PCI-MXI-2 or PXI-8320 configuration settings. For
information on the software, including optional settings, use MAX and its
online help. Access MAX from the
Measurement & Automation
icon on
the desktop. To access the MAX online help, choose
Help»Help Topics
.
Installing the Hardware
This section summarizes how to install your MXI-2 hardware.
Installing Your PCI-Based MXI-2 Interface
You received either a PCI-MXI-2 or a PXI-8320 in your kit.
Caution
To guard against electrostatic discharge, touch the antistatic plastic package to a
metal part of your computer or chassis before removing the board from the package. Your
computer or chassis should be plugged in but powered off.