![background image](http://html2.mh-extra.com/html/national-instruments/mxi-express-x4-series/mxi-express-x4-series_user-manual_3403900015.webp)
Chapter 2
Hardware Installation
Fiber-Optic MXI-Express x4 for PXI Express User Manual
2-2
ni.com
Note
The BIOS or motherboard may not support the NI PCIe-8375 in a slot intended for
a graphics card.
Note
The NI PCIe-8375 requires a host computer that supplies a PCI Express clock that
adheres to the
PCI Express Specification
. The NI PCIe-8375 may not be compatible with
systems with noncompliant clocks, particularly systems with clocks whose frequency
peaks over 100 MHz. Refer to the NI PCIe-8375 web page on
ni.com
for more
information.
5.
Locate the metal bracket that covers the cut-out in the back panel of the
computer for the slot you have selected. Remove and save the
bracket-retaining screw and the bracket cover.
6.
Line up the NI PCIe-8375 with the slot on the back panel. Slowly lower
the NI PCIe-8375 until its card-edge connector is resting on the
expansion slot receptacle. Using slow, evenly distributed pressure,
press the NI PCIe-8375 straight down until it seats in the expansion
slot, as shown in Figure 2-1.
7.
Reinstall the bracket-retaining screw to secure the NI PCIe-8375 to the
back panel rail.
8.
Replace the computer cover.