National Instruments MXI-Express x1 Series Скачать руководство пользователя | Manualshive

Страница: 28 / 120

background image

© National Instruments

|

3-1

3

Installation and Configuration

This chapter explains how to unpack, install, and configure the MXI-Express x1 hardware and
software.

Unpacking

Your MXI-Express x1 boards are shipped in antistatic packages to prevent electrostatic damage
(ESD) to the devices. ESD can damage several components on the device.

Caution

Never

touch the exposed pins of connectors. Doing so may damage the

device.

To avoid such damage in handling the device, take the following precautions:
•

Ground yourself using a grounding strap or by holding a grounded object.

•

Touch the antistatic package to a metal part of the computer chassis before removing the
device from the package.

Remove the device

from the package and inspect the device

for loose components or any sign

of damage. Notify NI if the device

appears damaged in any way. Do

not

install a damaged device

into a computer, laptop, PXI/CompactPCI, PXI Express/CompactPCI Express, CompactRIO, or
VXI chassis.

Store the device in the antistatic envelope when not in use.

Hardware Installation

The following are general instructions for installing the MXI-Express x1 cards. Consult your
computer user manual or technical reference manual for specific instructions and warnings.

Installing an NI PCI-8361 or NI PCIe-8361/8362
Host Card

Complete the following steps to install the NI PCI-8361 or NI PCIe-8361/8362 in your
computer.
1.

Power off your computer.

Caution

To protect both yourself and the computer from electrical hazards, your

computer should remain off until you finish installing all hardware as instructed.

«
...
26
27
28
29
30
...
»

Содержание MXI-Express x1 Series

























































































































Отзывы:

Нет отзывов

Похожие инструкции для MXI-Express x1 Series

Бренд: DARAY Страницы: 24

Бренд: Jafar Страницы: 9

Бренд: National Instruments Страницы: 16

Бренд: Jasco Страницы: 11

Бренд: Xoop Lighting Страницы: 20

Бренд: Vari Lite Страницы: 132

Бренд: HALDER Страницы: 2

Бренд: Hakko Electronics Страницы: 16

Бренд: LANGER EMV-Technik Страницы: 25

Electric Clamshell CSE12-208VCD

Бренд: Lang Страницы: 16

Бренд: Omlet Страницы: 60

Бренд: TANACOM Страницы: 27

Бренд: iBACheck Страницы: 2

Бренд: Easylife Страницы: 3

Бренд: York Страницы: 32

Exitronix LEMD Series

Бренд: BARRON Страницы: 6

Team Agile Color Tune TM16-0

Бренд: GRAU Страницы: 24

Бренд: Jenx Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды