MON-10467 (DC)
Hardware needed:
•
M6 to M8 bolts and nuts or 1/4 in. to 5/16 in. bolts and nuts
•
Washers (recommended)
•
M16 glands (supplied by NI)
•
Plugs rated for Type 3 or greater ingress protection for unused ports
•
PG16 gland (supplied by NI) or 0.5 in. conduit fitting
•
Power cable with a smooth, round jacket and individual conductors up to 14 AWG that
comply with your local electrical code
Tools needed:
•
2.5 mm flat-blade screwdriver (your own or NI part number 786911-01)
•
#2 Phillips screwdriver
•
19 mm deep socket or wrench
•
22 mm socket or wrench
•
27 mm deep socket
•
30 mm socket or wrench
•
24 mm socket or wrench
•
(Optional) multi-prong actuation tool (WAGO part number 279-433)
•
(Optional) 19 mm gland dome nut tightening tool (SEALCON part number S-1900-WR)
•
(Optional) 24 mm gland dome nut tightening tool (SEALCON part number S-2400-WR)
MON-10467 (BATTERY)
Hardware needed:
•
M6 to M8 bolts and nuts or 1/4 in. to 5/16 in. bolts and nuts
•
Washers (recommended)
•
M16 glands (supplied by NI)
•
Plugs rated for Type 3 or greater ingress protection for unused ports
•
Chassis ground cable with a smooth, round jacket and spade or ring lug
Tools needed:
•
2.5 mm flat-blade screwdriver (your own or NI part number 786911-01)
•
#2 Phillips screwdriver
•
19 mm deep socket or wrench
•
22 mm socket or wrench
•
(Optional) multi-prong actuation tool (WAGO part number 279-433)
•
(Optional) 19 mm gland dome nut tightening tool (SEALCON part number S-1900-WR)
Safety
MON-10467 User Guide
|
© National Instruments
|
5
