Figure 1. Mounting Dimensions
293.86 mm
(11.569 in.)
267.00 mm
(10.512 in.)
312.94 mm
(12.321 in.)
279.34 mm
(10.998 in.)
286.00 mm
(11.260 in.)
139.67 mm
(5.499 in.)
76.00 mm
(2.992 in.)
56.00 mm
(2.205 in.)
127.00 mm
(5.000 in.)
127.00 mm
(5.000 in.)
20.00 mm
(0.787 in.)
Hardware needed:
•
M6 to M8 bolts and nuts or 1/4 in. to 5/16 in. bolts and nuts
•
Washers (recommended)
Complete the following steps to mount the MON-10467.
1.
Place the device against the surface on which you want to mount it.
2.
Insert bolts into the mounting holes, placing at least two bolts on each flange. You must
use at least four bolts in total to secure the device, but may use more than four for
additional security.
3.
(Optional) place washers between the bolt and the flange and/or between the mounting
structure and nuts as needed.
4.
Place nuts onto the bolts and tighten to secure them.
Installing the Antenna and Boot
Notice
Never apply power or operate the MON-10467 without the antenna
installed. Doing so may damage the device.
14
|
ni.com
|
MON-10467 User Guide