Chapter 3 Configuring and Testing
3-8
ni.com
Complete the following steps to use channel strings in verifying the signal:
1.
Expand
Devices and Interfaces
.
2.
Expand
Traditional NI-DAQ Devices
.
3.
Right-click the appropriate E Series DAQ device.
4.
Click
Test Panels
.
5.
Enter the channel string.
6.
Enter the input limits.
7.
Select the
Data Mode
.
8.
Select the
Y Scale Mode
.
Refer to the
LabVIEW Measurements Manual
for more information and for
proper formatting of channel strings for different uses.
Verifying the Signal Using Virtual Channel
If you have already created a virtual channel, complete the following steps
to verify the signal:
1.
Right-click the virtual channel you want to verify and select
Test
.
2.
In
Channel Names
, select the channel you want to verify.
3.
When you have completed verifying the channel, click
Close
.
