manualshive.com logo in svg

National Instruments Isolated Analog Input Device NI PXI-4224, Руководство пользователя

Поделиться
Скачать
National Instruments Isolated Analog Input Device NI PXI-4224 Скачать руководство пользователя страница 67

©

 National Instruments Corporation

C-1

NI PXI-4224 User Manual

C

Removing the NI PXI-4224

This appendix provides details for removing an NI PXI-4224 device from 
MAX and from a PXI or PXI/SCXI combination chassis.

Note

You must physically remove the NI PXI-4224 from the chassis before you can 

remove it from MAX.

Removing the NI PXI-4224 from a PXI or PXI/SCXI 
Combination Chassis

Consult the PXI or PXI/SCXI chassis documentation for additional 
instructions and cautions. To remove the NI PXI-4224 device from a PXI 
or PXI/SCXI chassis, complete the following steps while referring to 
Figure C-1:

1.

Power off the PXI chassis. Do 

not

 remove the NI PXI-4224 device 

from a chassis that is powered on. If the you are using a PXI/SCXI 
combination chassis, also power off the SCXI portion of the chassis.

2.

Rotate the mounting screws that secure the NI PXI-4224 to the chassis 
counter-clockwise until they are loose, but do not completely remove 
the screws.

3.

Remove the NI PXI-4224 by pushing down steadily on the 
injector/ejector handle until the device disengages from the chassis.

4.

Slide the device completely out.

The next time you restart the computer the NI PXI-4224 will have a red 
circle with a white 

X

 inside it next to the device in MAX.

Содержание Isolated Analog Input Device NI PXI-4224






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды