Appendix A
Specifications
A-4
ni.com
Pollution Degree .....................................2
Relative humidity ...................................5% to 90%, noncondensing
Safety
The IMAQ 1428 meets the requirements of the following standards
of safety for electrical equipment for measurement, control, and laboratory
use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1
•
CAN/CSA C22.2 No. 61010-1
Note
For UL and other safety certifications, refer to the product label, or visit
ni.com/certification
, search by model number or product line, and click the
appropriate link in the Certification column.
Electromagnetic Compatibility
Emissions................................................EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................EN 61326:1997 + A2:2001,
Table 1
EMC/EMI ...............................................CE, C-Tick, and FCC Part 15
(Class A) Compliant
Note
For EMC compliance, operate this device with shielded cabling.
CE Compliance
The IMAQ PCI-1424 device meets the essential requirements of applicable
European Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
, search by model number or product line, and click the
appropriate link in the Certification column.
