©
National Instruments Corporation
2-1
2
Configuration and Installation
This chapter lists what you need to get started acquiring images with
your IMAQ PCI-1424 device; describes optional equipment and custom
cables; and explains how to unpack, configure, and install your IMAQ
device.
What You Need to Get Started
To set up and use your PCI-1424, you will need the following:
❑
PCI-1424 device
❑
NI-IMAQ for Windows 2000/NT/XP
❑
Optional software packages and documentation:
–
NI Vision Builder for Automated Inspection
–
NI Vision Assistant
–
LabVIEW
–
LabWindows/CVI
–
Measurement Studio
❑
IMAQ D100 series camera cables, depending on your camera
❑
IMAQ D2504 video cable (optional—for access to trigger lines)
❑
A video camera or other video source
❑
Pentium-based PCI computer running Windows 2000/NT/XP
