Appendix E
Error Codes
E-2
ni.com
18
Syntax
Missing
<Program Separator>
19
Syntax
Too much data
30
Device
No error
31
Device
Logical address is out of range 0 through 254
32
Device
No device is at that logical address
33
Device
GPIB secondary address is out of range 0 through 30
34
Device
VXI interrupt handler number is out of range 1 through 3
35
Device
VXI interrupt level is out of range 0 through 7
36
Device
A16 address is out of range 0000h through FFFEh
37
Device
Address must be even
38
Device
Word write value is out of range 0000h through FFFFh
39
Device
A bus error occurred during the access
40
Device
A24 address is out of range 200000h through E7FFFEh
41
Device
488.2 register is out of range 0 through 255
42
Device
Console mode is disabled: must have one output mode enabled
43
Device
Logical device has no secondary address link
44
Device
Unable to delete secondary address link
45
Device
Unable to create secondary address link
46
Device
Secondary address is already attached to a logical address
47
Device
Device is not a Message-Based device
48
Device
Device is not a servant of this GPIB-VXI/C
49
Device
Device does not have commander capability
50
Device
Not Dynamically Configured
51
Device
Commander did not accept
Device Grant
command
52
Device
Servant did not accept BNO or
Identify Commander
command
Table E-1.
Error Codes (Continued)
Error
Number
Type
Description
