National Instruments FOUNDATION NI-FBUS Скачать руководство пользователя страница 118

Страница: 118 / 178

Chapter 6

NI-FBUS Function Reference

NI-FBUS Hardware and Software User Manual

6-56

ni.com

•

If you do not have a block descriptor, you have the following choices:

–

You can use the

NIFB_BLOCK_ITEM

macro to specify an item.

–

You can use the

NIFB_BLOCK_ITEM_SUBINDEX

macro to specify a subelement.

–

You can use the

NIFB_BLOCK_INDEX

macro specify an object by index.

–

You can use the

NIFB_BLOCK_INDEX_SUBINDEX

macro to specify a subindex.

You can find all these macros in the

nifbus.h

header file.

Alert and Trend Functions

The following tables list the alert and trend functions.

Table 6-6.

Alert Functions

Function

Purpose

nifAcknowledgeAlarm

Acknowledges an alarm received

nifWaitAlert

Waits for an alert (an event or an alarm) from a
specific device or from

any

device

nifWaitAlert2

Waits for an alert (an event or an alarm) from a
specific device or from

any

device. This function

supports Standard Diagnostic Alert.

Table 6-7.

Trend Function

Function

Purpose

nifWaitTrend

Waits for a trend from a specific device or from

any

device

Содержание FOUNDATION NI-FBUS



















































































































































































Результаты поиска

Содержание FOUNDATION NI-FBUS

Отзывы:

National Instruments FOUNDATION NI-FBUS, Руководство пользователя по аппаратному и программному обеспечению, Страница: 118 / 178

Результаты поиска

Содержание FOUNDATION NI-FBUS

Отзывы: