Connecting the FP-20
xx to the Network
Connect the FP-20
xx to an Ethernet network by connecting the RJ-45 Ethernet
port of the FP-20
xx to an Ethernet hub using a standard Category 5 Ethernet
cable.
Optionally, you can connect an FP-20
xx directly to a computer using an Ethernet
crossover cable.
Do not use a cable longer than 100 m. If you are using a 100 Mbps Ethernet,
National Instruments recommends using a Category 5 shielded twisted-pair
cable. If you need to build your own cable, refer to the
FP-20xx User Manual
specifications section for cabling details.
4
FP-20xx Quick Start Guide
8
ni.com
Crossover Cable
Straight-Through
UTP Cable
Straight-Through
UTP Cable
322759e.qxp 4/22/2004 4:00 PM Page 8