Installing Software
on the Host PC
A.
Install the software packages you
plan to use, such as LabVIEW,
LabVIEW RT, Measurement Studio,
VI Logger, or LabWindows
™
/CVI
™
,
before you install the FieldPoint
software. The FieldPoint software
installation installs the LabVIEW
VIs and examples, and the
LabWindows/CVI instrument driver and examples, only if it finds the
corresponding development software installed.
B.
Close all other applications.
C.
Insert the National Instruments FieldPoint Software CD into the CD-ROM
drive of your computer.
D.
Follow the onscreen instructions to complete the installation.
Note
If the setup does not launch automatically, select
Start»Run
from Windows, enter
d:\setup
, where
d
is the letter of the CD-ROM
drive, and select
OK
.
Configuring the FP-20
xx
Launch NI Measurement & Automation Explorer (MAX) to configure the FP-20
xx.
For information about configuring the FP-20
xx in software, refer to the
Measurement & Automation Explorer Help for FieldPoint
(
Start»Programs»National Instruments»FieldPoint»FieldPoint Help
).
9
8
FP-20xx Quick Start Guide
14
ni.com
322759e.qxp 4/22/2004 4:00 PM Page 14