cFP-AI-118
2
ni.com
To install the cFP-AI-118, refer to Figure 1 and complete the
following steps:
1. Align the captive screws on the cFP-AI-118 with the holes on
the backplane. The alignment keys on the cFP-AI-118 prevent
backward insertion.
2. Press firmly to seat the cFP-AI-118 on the backplane.
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
m
(10 lb
in.) of torque. The nylon coating on the screws prevents
them from loosening.
Figure 1.
Installing the cFP-AI-118
1
cFP-AI-118
2
Captive Screws
3
cFP Controller Module
4
Screw Holes
5
cFP Backplane
2
2
1
3
5
4
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
