National Instruments FD-11634 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 55

National Instruments FD-11634 Скачать руководство пользователя страница 48

Alternate Mounting Configurations

The maximum operating temperature of 85 °C may be reduced for any mounting configuration
other than the reference mounting configuration. A 10 °C (18 °F) reduction in maximum
operating temperature is sufficient for most alternate mounting configurations. Follow the
mounting requirements for all mounting configurations.

The published accuracy specifications, although not guaranteed for alternate mounting
configurations, may be met depending on the system power and the thermal performance of
the alternate mounting configuration.

Contact NI for further details regarding the impact of common alternate mounting
configurations on maximum operating temperature and accuracy.

Mounting the Device on a DIN Rail

The FD-11960 DIN rail mounting kit is an accessory you can use to mount a FieldDAQ device
to a DIN rail. The hardware in the FD-11960 DIN rail mounting kit includes a bracket panel, a
DIN rail clip, four M5 x 10 mm screws, four M5 washers, and two 8-32 x 1/4 in. screws.

Complete the following steps to install a FieldDAQ device onto a DIN rail using the FD-11960
DIN rail mounting kit.
1.

Attach the FieldDAQ device to the bracket panel using the included M5 x 10 mm screws
and M5 washers. The front of the bracket panel, which includes an outline of the
FieldDAQ device, should be attached to the back of the FieldDAQ device.

2.

Attach the DIN rail clip to the FieldDAQ device and bracket panel using the
8-32 x 1/4 in. screws included in the kit. Tighten the screws to a maximum torque of
1.3 N · m (11.5 lb · in.).

FD-11634 User Guide

|

© National Instruments

|

47

«
...
46
47
48
49
50
...
»

Содержание FD-11634
























































Отзывы:

Нет отзывов