National Instruments FD-11634 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 55

National Instruments FD-11634 Скачать руководство пользователя страница 32

that are attached to each of the two ports. Refer to

Synchronization across a Network

details.

Note

The IEEE 802.1AS protocol is an IEEE 1588 profile, but is incompatible

with other IEEE 1588 profiles. When FieldDAQ devices are using the
IEEE 802.1AS protocol to synchronize they cannot synchronize with devices that
use other protocols or IEEE 1588 profiles and vice versa.

FieldDAQ MAC Addresses

The FieldDAQ device is associated with two MAC addresses—both of which are labeled on
the device—device and switch. These MAC addresses are not associated with a particular
Ethernet port, but both addresses can appear on both ports as necessary.

Table 11. NI MAX Device and Switch MAC Addresses

Device MAC Address

Switch MAC Address

Associated with the device’ IP
address

Associated with the internal Ethernet switch—not
associated with the device’s IP address

Used by normal device traffic

Used for Ethernet protocols for network configuration
and synchronization

Listed in MAX

Not listed in MAX

The switch MAC address is used to implement the following switch protocols:
•

IEEE 802.1AS-2011 (Precision Time Protocol)

•

IEEE 802.1Q (Rapid Spanning Tree Protocol [RSTP] implemented)

•

IEEE 1588 (Delay Request-Response Default Precision Time Protocol)

The switch MAC address only appears in packets exchanged between the switch embedded in
the FieldDAQ device and the next Ethernet device. It will not propagate further in a properly
configured network. For more information about the recommended configurations for
networking the FieldDAQ device, refer to

Topology Options

Topology Options

Recommended networking topologies are described in this section.
•

Host

—Can be a Windows computer or a real-time controller with the NI Linux

Real-Time operating system, such as the IC-317

x

, cRIO-9035/9039 Sync, cRIO-904

x

/

905

x

, or cDAQ-9132/9133/9134/9135/9136/9137 for LabVIEW Real-Time

•

Node

—Can be any FieldDAQ device or IEEE 802.1AS-compliant CompactDAQ chassis,

such as the cDAQ-9185/9189

For more information about designing Ethernet measurement systems, visit

and

enter

fdenet

.

FD-11634 User Guide

|

© National Instruments

|

31

«
...
30
31
32
33
34
...
»

Содержание FD-11634
























































Отзывы:

Нет отзывов