5-6
|
ni.com
Chapter 5
BIOS Configuration and System Recovery
inappropriate BIOS setting. Any nondefault settings are also restored to their factory
defaults. The <F9> key can also be used to select this option.
•
Save as User Defaults
—This option saves a copy of the current BIOS settings as the User
Defaults. This option is useful for preserving custom BIOS setup configurations.
•
Restore User Defaults
—This option restores all BIOS settings to the user defaults. This
option is useful for restoring previously preserved custom BIOS setup configurations.
•
Boot Override
—This option lists all possible bootable devices and allows the user to
override the
Boot Option Priorities
list for the current boot. If no changes have been made
to the BIOS setup options, the system will continue booting to the selected device without
first rebooting. If BIOS setup options have been changed and saved, a reboot is required
and the boot override selection will not be valid.
Restoring the NI CVS-1459RT to Factory Default
Condition
Complete the following steps to restore the NI CVS-1459RT to its factory default condition.
These steps do not restore the BIOS settings to factory default. Use the
Restore Factory
Defaults
of the BIOS to restore the BIOS settings.
1.
Start the NI CVS-1459RT in safe mode. To start in safe mode, press the RESET button for
more than 5 seconds.
2.
Launch MAX.
3.
In the MAX configuration tree, expand
Remote Systems
.
4.
Right-click the name of the NI CVS-1459RT you want to restore and select
Format Disk
.
5.
After the format completes, disable safe mode by pressing the RESET button for less than
5 seconds.
6.
Refer to the
NI CVS-1459RT Getting Started Guide
for information about installing
software and configuring the NI CVS-1459RT.
