National Instruments CMS-9068, Поддержание работоспособности оборудования

Страница: 11 / 23

1
2
1. Insert one edge of the DIN rail into the deeper opening of the DIN rail clip.
2. Press down firmly to compress the spring until the clip locks in place on the DIN rail.
Caution
Ensure that no C Series modules are in the cRIO-9068 before removing it
from the DIN rail.
Mounting the Device on a Rack
You can use the following rack mount kits to mount the cRIO-9068 and other DIN rail-
mountable equipment on a standard 482.6 mm (19 in.) rack.
•
NI Sliding Rack-Mounting Kit, 779102-01
• NI Rack-Mounting Kit, 781989-01
Note
You must use the NI DIN rail mounting kit, 779018-01, in addition to a rack-
mounting kit.
Mounting the Device on a Desktop
You can use the NI desktop mounting kit to mount the cRIO-9068 on a desktop.
What to Use
• cRIO-9068
• Screwdriver, Phillips #1
• Screwdriver, Phillips #2
• NI desktop mounting kit, 779473-01
–
Desktop mounting brackets (x2)
– Adapter bracket
– M3 × 20 screw (x2)
What to Do
Complete the following steps to mount the cRIO-9068 on a desktop.
10 | ni.com | Maintaining NI CMS-9068, MMS-9068, and EMSA-9068 Hardware for an NI InsightCM Device