National Instruments CFP-TC-120 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 19

National Instruments CFP-TC-120 Скачать руководство пользователя страница 2

FP-TC-120 and cFP-TC-120

2

ni.com

Installing the FP-TC-120

The FP-TC-120 mounts on a FieldPoint terminal base (FP-TB-

x

).

Hot plug-and-play enables you to install the FP-TC-120 onto a
powered terminal base without disturbing the operation of other
modules or terminal bases. The FP-TC-120 receives operating
power from the terminal base.

To install the FP-TC-120, refer to Figure 1 and follow these steps:

1. Slide the terminal base key to either position X (for any

module) or position 1 (for the FP-TC-120).

2. Align the FP-TC-120 alignment slots with the guide rails on

the terminal base.

3. Press firmly to seat the FP-TC-120 on the terminal base.

The latch on the terminal base locks the FP-TC-120 into place
when it is firmly seated.

Figure 1.

Installing the FP-TC-120

Installing the cFP-TC-120

The cFP-TC-120 mounts on a FieldPoint backplane (cFP-BP-

x

).

Hot plug-and-play enables you to install the cFP-TC-120 onto a
powered backplane without disturbing the operation of other
modules or connector blocks. The cFP-TC-120 receives operating
power from the backplane.

To install the cFP-TC-120, refer to Figure 2 and follow these steps:

1. Align the captive screws on the cFP-TC-120 with the holes on

the backplane. The alignment keys on the cFP-TC-120 prevent
backward insertion.

Alignment

Slot

Key

Latch

Guide Rails

Terminal Base

I/O Module

«
1
2
3
4
...
»

Содержание CFP-TC-120




















Отзывы:

Нет отзывов