![background image](http://html1.mh-extra.com/html/national-instruments/9514/9514_getting-started_709144020.webp)
20
|
ni.com
|
Getting Started with NI 9514/16 Modules and AKD Servo Drives
Step 5: Install AKD WorkBench and Configure the Drive
AKD WorkBench is available on the CD that came with the AKD servo drive and is also
available from
ni.com/updates
. Complete the following steps to install and configure the
drive settings with AKD WorkBench.
1. Insert the AKD WorkBench CD in the CD-ROM drive on your PC.
2. Double-click
Full Setup.exe
to launch the installer.
3. Follow the onscreen instructions to complete the installation.
4. Launch the AKD WorkBench software by clicking the AKD WorkBench icon on the
desktop, or by selecting
Start»All Programs»Kollmorgen»AKD WorkBench
.
5. Select the drive to configure from the list and click
Connect
.
Note
If the drive is not in the list, refer to the
this document for possible solutions.