NI Digital Waveform Generator/Analyzer Guide
4
ni.com
1. Verifying the System Components
This section specifies the minimum system requirements and recommended
system for NI-HSDIO and your digital waveform generator/analyzer.
Minimum System Requirements
The minimum system requirements include the following components
and tools:
•
Pentium 200 MHz or equivalent processor
•
64 MB RAM
•
A PXI chassis and controller or desktop computer
•
1/8 in. flathead screwdriver
•
Number 1 Phillips screwdriver
•
Microsoft Internet Explorer 5.5 or later
•
Measurement & Automation Explorer (MAX) 3.1 or later
•
A screen resolution of 800 × 600 with 256 colors (required for the
NI Script Editor)
•
NI SHC68-C68-D2 cable, available from NI (part number 188142-01)
•
NI EMC Filler Panel Kit, available from NI (part number 778700-01)
Note
Do not use cables other than the NI SHC68-C68-D2 cable
with the NI 655
X
/654
X
.
Recommended System
The recommended system requirements include the following components
and tools:
•
Pentium III/Celeron 600 MHz or equivalent processor
•
256 MB RAM
•
A PXI chassis and controller or desktop computer
•
1/8 in. flathead screwdriver
•
Number 1 Phillips screwdriver
•
Microsoft Internet Explorer 5.5 or later
•
A screen resolution of 800 × 600 with 256 colors (required for the
NI Script Editor)
•
NI SHC68-C68-D2 cable, available from NI
Note
Do not use cables other than the NI SHC68-C68-D2 cable
with the NI 655
X
/654
X
.