5-10
|
ni.com
Chapter 5
Analog Output
AO Sample Clock Timebase Signal
The AO Sample Clock Timebase (ao/SampleClockTimebase) signal is divided down to provide
a source for AO Sample Clock.
You can route any of the following signals to be the AO Sample Clock Timebase signal:
•
100 MHz Timebase (default)
•
20 MHz Timebase
•
100 kHz Timebase
•
PXI_CLK10
•
PFI <0..15>
•
RTSI <0..7>
•
PXI_STAR
•
PXIe_DSTAR<A,B>
•
Analog Comparison Event (an analog trigger)
AO Sample Clock Timebase is not available as an output on the I/O connector.
You can use an external sample clock signal as AO Sample Clock Timebase signal
by dividing the signal down in a DAQ device. You can also use it as AO Sample Clock
signal without dividing the signal.
Содержание 6368
Страница 1: ...PXIe 6368...
