NI 446X Calibration Procedure
4
ni.com
frequency-domain analysis tools not included in the Base Development
System.
You can access the NI-DAQmx header file,
DAQmx.h
, like any standard
library. You can find examples of how to use the NI-DAQmx driver in the
Program
Files\National
Instruments\NI-DAQ\Examples
directory.
Documentation
You might find the following documentation helpful as you write your
calibration procedure:
•
NI-DAQmx Help
—This help file contains general information about
measurement concepts, key NI-DAQmx concepts, and common
applications that are applicable to all programming environments.
Select
Start»All Programs»National Instruments»NI-DAQ»
NI-DAQmx Help
.
•
NI-DAQmx C Reference Help
—This help file contains C reference and
general information about measurement concepts. Select
Start»All Programs»National Instruments»NI-DAQmx Base»
Documentation»C Function Reference Manual
.
•
DAQ Getting Started Guide
for NI-DAQ 8.1 or later—This guide
describes how to install your NI-DAQmx for Windows software, your
NI-DAQmx-supported DAQ device, and how to confirm that your
device is operating properly. Select
Start»All Programs»National
Instruments»NI-DAQ»DAQ Getting Started Guide
.
•
NI 446X Specifications
—This document contains information about
specific device features. The limits you use to verify the accuracy of
the devices are based on the specifications found in this document.
Select
Start»All Programs»National Instruments» NI-DAQ»
Browse Device Documentation
to launch the Device Documentation
Browser. You then can select the
Dynamic Signal Acquisition
book
to browse the list of DSA devices. Select your device to find a link to
the
NI 446X Specifications
.
These documents are installed with NI-DAQmx. You can also download
the latest versions from the NI Web site at
ni.com/manuals
.