National Instruments Corporation DAQCard-500 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 56

background image

Introduction

Chapter 1

DAQCard-500 User Manual

1-2

© National Instruments Corporation

What You Need to Get Started

To set up and use your DAQCard-500, you will need the following:

DAQCard-500

PR27-30F I/O connector with cable (must be purchased separately)

DAQCard-500 User Manual

One of the following software packages and documentation:

NI-DAQ for PC compatibles
NI-DAQ for NEC PC-9800 Series
NI-DAQ for Macintosh
LabVIEW for Windows
LabWindows/CVI for Windows

Your computer

Software Programming Choices

There are several options to choose from when programming your National Instruments DAQ
and SCXI hardware. You can use LabVIEW, LabWindows/CVI, or NI-DAQ.

LabVIEW and LabWindows/CVI Application Software

LabVIEW and LabWindows/CVI are innovative program development software packages for
data acquisition and control applications. LabVIEW uses graphical programming, whereas
LabWindows/CVI enhances traditional programming languages. Both packages include
extensive libraries for data acquisition, instrument control, data analysis, and graphical data
presentation.

LabVIEW features interactive graphics, a state-of-the-art user interface, and a powerful graphical
programming language. The LabVIEW Data Acquisition VI Library, a series of VIs for using
LabVIEW with National Instruments DAQ hardware, is included with LabVIEW. The
LabVIEW Data Acquisition VI Libraries are functionally equivalent to the NI-DAQ software.

LabWindows/CVI features interactive graphics, a state-of-the-art user interface, and uses the
ANSI standard C programming language. The LabWindows/CVI Data Acquisition Library, a
series of functions for using LabWindows/CVI with National Instruments DAQ hardware, is
included with the NI-DAQ software kit. The LabWindows/CVI Data Acquisition libraries are
functionally equivalent to the NI-DAQ software.

Using LabVIEW or LabWindows/CVI software will greatly reduce the development time for
your data acquisition and control application.

«
...
10
11
12
13
14
...
»

Содержание DAQCard-500

























































Отзывы:

Нет отзывов

Похожие инструкции для DAQCard-500

Бренд: R.V.R. Elettronica Страницы: 38

Бренд: Campbell Страницы: 72

Бренд: Eaton Страницы: 4

Бренд: Eaton Страницы: 10

Бренд: Quantum Страницы: 97

Бренд: CAME BPT Страницы: 8

Бренд: Balboa Water Group Страницы: 88

Spray Away 5266

Бренд: Havahart Страницы: 6

CPX-AP-I-8DI-M8-3P

Бренд: Festo Страницы: 18

Бренд: Sandstrom Страницы: 32

Бренд: TCS Страницы: 15

Бренд: Jensen Страницы: 13

Бренд: Dannmar Страницы: 85

Бренд: Dahua Страницы: 18

Бренд: Dhollandia Страницы: 69

Бренд: NAIM Страницы: 51

Бренд: Athena Страницы: 183

PORTA GANTRY 1100

Бренд: REID LIFTING Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды