PREPARATION
1.
Ensure that the motorcycle is on flat level ground.
2.
It is recommended that the motorcycle sit for at least one
hour prior to installation to allow the engine to cool.
3
. Remove the two lower left and right engine mount bolts.
(14mm Wrench) These bolts will not be re-used.
Figure 1.
By National Cycle
INSTALLATION AND OWNER’S MANUAL
P4306
for YAMAHA® XV1600 and 1700
NOTE:
Right and Left side of Motorcycle is determined
while sitting on the bike.
PARTS LIST
Index
Part No.
Description
Qty.
1
90-970303-000
Highway Bar, Left
1
2
90-970304-000
Highway Bar, Right
1
BAG 956
3
51-513052-000
“U” Bolt
2
4
42-431010-000
Whizlok Nut, Chrome
6
5
51-516610-000
Screw, Button Head 5/16 -18 x 1”
2
6
51-571202-000
Bolts, Hex Flange M10-1.25 x 25
2
7
49-491010-000
Washer, Split
2
14mm Combination Wrench
1/2” Combination Wrench
5/8” Hex Wrench
Figure 1
©2009 National Cycle, Inc. PO Box 158, Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / e mail: [email protected]
Page 1 of 2
10-114859-000 01/09
6
1
2
3
4
5
Parts List
7
