National Crane 600H, Руководство по обслуживанию

Страница: 189 / 232

NATIONAL CRANE
08-19-2022 Control # 092-13
9-7
600H SERVICE CRANE INSTALLATION
9
FIGURE 9-5
600H TM Minimum Measurements
360°
C
Tandem
L
119.77
600H TM 360° Full Capacity Working Area
Working Area 360°
Gross Axle Weight (GAW) Rating 54,000 lb (24,493.9 kg)
Wheel Base (WB) 250 in (635 cm)
Cab to Axle Trunnion (CT) 168 in (487.6 cm)
Frame Section Modulus Under Crane (110,000 psi) 30 in
3
(491.6 cm
3
)
Frame Section Modulus Over Rear jacks (110,000 psi) 30 in
3
(491.6 cm
3
)
Frame Section Modulus Over Single Front Outrigger (SFO) (110,000 psi) 30 in
3
(491.6 cm
3
)
Frame Section Modulus at SFO Attach Point (110,000 psi) 2 in
3
(32.7 cm
3
)
Frame Section Modulus at Front Spring Hanger (110,000 psi) 11 in
3
(180.2 cm
3
)
Minimum Truck Weight Front 10,000 lb (4535.9 kg)*
Minimum Truck Weight Rear 9,500 lb (4309.1 kg)*
Estimated Final Weight (truck and crane) 15,500 lb (7030.6 kg)
* Weights are for bare truck. Final crane stability weight must include crane, jacks, sub-base, and 20 ft
wood bed or be counterweighted accordingly.
38.50
250.00 Min
168.00 Min
65.38
29.25
64.31
Single Front Outrigger
Required for 360° Work Area
GAW Front 20,000 lb
(9071.8 kg)
GAW Rear 34,000 lb
(15,422.1 kg)
90.00
REFERENCE ONLY