Page 4 National Communications
INSTALLATION
1. UNPLUG all equipment from the telephone socket to be used.
2. REMOVE the telephone line cords that are fitted to the DEVICES
which need to be connected to your AUTO-CONNECT (ie unplug the
telephone cables connected to your devices where the new style
modular plug connects to your device).
3. TELEPHONE LINE CONNECTION
CONNECT the modular end of one of the cables which you have
removed, to the TELEPHONE LINE port of the AUTO-CONNECT. Then
CONNECT the other end, with the large old style male Telstra plug,
direct to your telephone line socket.
4. PRIMARY DEVICE CONNECTION
(Primary Receiving Device or Primary Number Device)
Using one of the supplied Modular - Modular line cords, CONNECT the
device which you require to RECEIVE all incoming calls to the
PRIMARY DEVICE port of the AUTO-CONNECT.
If you are connecting a Fax or modem device, please ensure that it is
set to the AUTO-ANSWER mode, and is set to ANSWER in the
FEWEST POSSIBLE RINGS.
5. ACCESSORY DEVICE CONNECTION
(Alternative Receiving Device or Multiple Number Device)
Using the remaining supplied Modular - Modular line cord, CONNECT
the OTHER device to the ACCESSORY DEVICE port of the AUTO-
CONNECT.
6. SET DIP SWITCHES TO DESIRED SETTINGS
If operation is required with the Ring Delay (page 5), EFT-POS (page
6) or MULTIPLE NUMBER (page 7) options, please set the Dip
Switches, located on the underside of the unit to the positions
required.
If NO options are required, set all switches to the OFF position.
7. POWER ADAPTOR CONNECTION
CONNECT the supplied Power Supply and switch it ON.
