Nass Magnet 0558, Руководство по эксплуатации

Страница: 1 / 6

nass magnet GmbH
Eckenerstrasse 4-6
30179 Hannover
Germany
Doc. No. 108-720-0010
Revision 7
14 May 2019
Ex nA, t Solenoid Coil Type 0558
Assessment no. nm 13 ATEX 0069 X
Operating Instructions
Dear Customer!
To ensure the function and for your own safety, please read these operating instructions carefully before you
begin with the installation. If there should still be any questions, please refer to nass magnet GmbH.
Tel ++49 (0) 511 6746-0
Fax ++49 (0) 511 6746-222
e-mail vertrieb@nassmagnet.de
General terms and conditions
 We are not liable for any damage caused by non-observation of this information as well as in case of
improper intervention regarding this device. Furthermore, warranty for the devices and accessories will
become void. Our general terms and conditions apply.
 The nass magnet solenoid coil is designed for operation with the nass magnet armature assemblies and
nass magnet valve systems; please consider the corresponding power levels.
 Applied standards in the Conformity Assessment:
EN 60079-0:2012+A11:2013
EN 60079-15:2010
EN 60079-31:2014
 In its installed state the device is appropriate for potentially explosive gas atmospheres of Group IIC
(protection type “ nA ”). The Equipment Protection Level (EPL) is Gc for intended application in Zone 2 ,
ATEX Category 3G . Alternatively the device is appropriate for potentially explosive dust atmospheres
of Group IIIC (protection type “ tc ”). The according Equipment Protection Level is Dc for intended
application in Zone 22 , ATEX Category 3D .

Beyond recognized rules of sound engineering practice these operating instructions refer to special
conditions for safe use as well as to further application conditions that must be observed in any case.
However, these operating instructions cannot consider all possible conditions and applications
completely, and do not replace the specifications valid in each case.