INTELLIREAM
®
MP
pg.
53
Warranty
NASARC
Cert-Equip WARRANTY POLICY
Intelliream
®
MP
is warranted by
NASARC
to the original commercial or institutional end user/owner against
defects in materials and workmanship as follows:
Motor, Solenoids, circuit board, cylinders
– 1 year
External parts, Intelliream
®
, spray nozzle, cables, and accessories
– 90 days
The warranty becomes effective on the date of purchase. During the warranty period, equipment covered by
the warranty and found to be defective will be repaired or replaced at the manufacturer’s discretion without
charge. The manufacturer’s responsibility is limited to repair or replacement of damaged or defective parts.
The equipment must be returned, transportation charges prepaid with proof of purchase date, to an authorized
service center or to
NASARC.
If a product warranty card has not been completed or proof of purchase is not
available, the warranty will be deemed to become effective at the time the product leaves the factory
authorized
NASARC
warehouse. Warranty repair service does not extend the period of warranty beyond the
original period. The warranty is not transferable.
This warranty does not cover defects in the equipment caused by ordinary wear and tear, abuse, misuse,
accident, or any other cause that is not the result of defective materials or workmanship.
Repair or replacement is the exclusive remedy for defective equipment under this warranty. This warranty is in
lieu of all other warranties written and implied, including any implied warranty of fitness for a particular purpose
of this equipment.
NASARC
shall not be liable for any consequential or incidental damages for breach of any
express or implied warranty of this equipment.
The month of manufacture can be found on the serial plate
+------- yy: Year
| +----- mm: Month (01 .. 12)
| | +--- nnn: Unit number within the month (001..999)
| | |
IRyymmnnn
For example IR1605033 is the 33
rd
unit manufactured in May (05) of 2016 (16)
