Page
14
/ 28
INFO:
When no cooking or cooking program is in progress, the brightness of the screen will be reduced
automatically after 1 minute following the last button press.
INFO! Upon first installation or after a power loss lasting longer than 48 hours, the date and time of day
settings will not be correct. Please set/correct them using
the SETTINGS menü.
INFO :
The symbol
appearing on the bottom right of the screen indicates that the,
button has a
shortcut function to enter the cooking menu directly. The function and Temperature settings indicated on
the screen will be the ones used in the last cooking performed before..
USER MANUAL :
Switching ON :
The screen will be black and empty when the device is OFF. By long ( 1 sec) pressing of the
button, the device is switched on, the screen lights up ( a temporary logo screen may appear
depending on the software version ) and the idle screen will be visible. The oven controls are enabled
now. To switch the device OFF , a long press of the same button is required. In that case, any running
cooking program will be cancelled.
Mains Power Losses:
Your oven control will not be affected from mains power interrupts shorter than 2 minutes. Longer
power losses will cause the oven to get OFF, any adjusted cooking or alarm will be cancelled. Upon power
restore after a long loss of power, the device will be in idle mode when it was ON , in OFF mode when it was
OFF before the mains power interrupt
The idle Screen :
The idle screen is defined as the screen appearance as no cooking program is in progress and the time
of day and date are shown. Any of the symbols
,
,
or
, not related to cooking may also take
place on the idle screen .
Digital Screeen Clock Analog Screeen Clock
When oven cavity Temperature > 60C
When the Temperature of the oven cavity is above 60C , the screen will appear as red on black.
