Using Markers
57
Using the Marker Configuration menu
Using the Marker Configuration menu
Instead of setting markers individually from the button bar markers can also be configured
fast and easily via the
Marker Config
menu.
Changing the configuration:
1.
Press the
Marker
key.
2.
In the
Button bar
tap the
Marker Conf.
button.
The
Marker Config
window opens showing the settings for each marker. The settings
can be changed in the
Button bar
.
3.
In the
Markers
tab of the
Marker Config
window, tap a marker from the list.
– or –
Tap
Marker No.
in the
Button bar
and select a marker from the dropdown list.
The editable parameters are displayed in the
Button bar
.
4.
Tap a parameter in the
Button bar
and change it as needed.
5.
Select another tab to change further settings (see following topics).
6.
To close the
Marker Config
menu, press the
Esc
key or tap the header of the button bar.
Markers button bar
In the
Markers
button bar following settings are available:
Tab
Select tab in the
Marker Config
window.
Marker No.
Select a marker to be set.
Enabled
Enable / disable marker.
A disabled marker is not displayed, but all settings are
retained.
Type
Set marker type:
M
= Single marker,
D
= Delta marker.
Ref.
Referenced marker if marker is set to delta.
Trace
Trace which the marker refers to.
Freq. Link
Two markers can be linked via a fixed frequency.
Time Link
Two markers can be linked via a fixed time.
Functions
Assign a function to a marker.
M1 as ref.
for all Delta Markers
Set marker 1 as reference for all delta markers.
Reset all Markers
Reset all markers.
