NARDA IDA, Руководство по эксплуатации, Страница: 125 / 292

6.12 Using Multi-Channel Tables
Narda IDA - 3106
117
6.11.2 Automatically hiding the status bars
You can hide the upper and lower status bars to allow more space for the
split screen display. You can link the hide function to activation of the
Magnifier function so that you do not have to hide the status bars manually
every time you switch to the split screen display.
To hide the status bars automatically:

The
Marker • Display
menu is active.
The Magnifier function is activated (
Magnifier: On
)
1.
Press the
Screen Arrangement
softkey.

The
Set Screen Arrangement
fold-out window opens.
2.
Use the rotary control knob and softkeys to highlight the item
Hide at
Magnifier
under
Upper status bar
or under
Lower status Bar
and
press the
OK
key.

The selected display is adjusted accordingly.
6.12 Using Multi-Channel Tables
All operating modes • Extras
1.
Press the
Select Multi-Ch. Table
softkey.

A list of the available multi-channel tables is displayed.
2.
Use the rotary control knob to select an item and press
OK
to confirm the
selection.
NOTE:
Information about creating a multi-channel table is found under
Displaying
and creating Multi-Channel Tables
on page 79.
Selecting a channel
NOTE:
You can find information about selecting channels in Multi - Channel Power
mode under
Showing and hiding channels
on page 213.
1.
If necessary, change the multi-channel table using the
Select Multi-Ch.
Table
softkey.
2.
Press the
Select Channel
softkey.

A list of the available channels is displayed.
3.
Use the rotary control knob to select an item and press
OK
to confirm the
selection.