NARDA ELT-400, Руководство по эксплуатации

Страница: 17 / 100

3-1
3 Preparation for use
3.1 Unpacking
3.1.1 Packaging
The packaging is designed to be re-used as long as it has not been
damaged during previous transport. Please therefore keep the original
packaging and use it whenever you want to transport the instrument in
future.
3.1.2 Checking the package contents
ª
Package contents: see page 8-11
3.1.3 Checking for transport damage
Check the instrument and all accessories for transport damage after you
have unpacked them. Such damage is most likely if the packaging itself has
been clearly damaged. Do not attempt to use an instrument that has been
damaged.
3.1.4 Recovery after storage and transport
Condensation may form on an instrument that has been stored or
transported at a low temperature when it is brought into a warm room. To
prevent damage, wait until all the condensation has evaporated from the
surface of the instrument before using it. The instrument must not be used
until it has reached a temperature that is within the guaranteed operating
range of -10 to +50 °C.