Napoleon TORCH GT8N страница 2 Скачать руководство пользователя

Страница: 2 / 16

W415-0619 / A /08.09.07

PG 2-5 INTRODUCTION

Warranty

Dimensions

General Instructions

General Information

Care of Glass & Plated Parts

5-6

VENTING

Venting Lengths

Air Terminal Locations

7-9

INSTALLATION/FRAMING

Wall & Ceiling Protection

Using Flexible Vent Components

Horizontal Air Terminal Installation

Fireplace Vent Connection

Gas Installation

Framing

Nailing Tab Installation

Clearance to Combustibles

ELECTRICAL

CONNECTION

Hard Wiring Connections

WARNING

• Do not burn wood or other materials in this

replace.

• Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns

or clothing ignition. Supervise young children when they are in the same room as the

replace.

• Clothing or other

ammable material should not be placed on or near the

replace.

• Due to high temperatures, the

replace should be located out of traf

c and away from furniture and draperies.

• Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot surfaces.

• Even after the

replace is out, the glass and/or screen will remain hot for an extended period of time.

• Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from hot surfaces. These

screens and guards must be fastened to the

oor.

• Any safety screen or guard removed for servicing must be replaced prior to operating the

replace.

• It is imperative that the control compartment and burner in the

replace and venting system are kept clean. The

replace and its

venting system should be inspected before use and at least annually by a quali

ed service person. More frequent cleaning

may be required due to excessive lint from carpeting, bedding material, etc. The

replace area must be kept clear and free from

combustible materials, gasoline and other

ammable vapours and liquids.

• Under no circumstances should this

replace be modi

ed.

• This

replace must not be connected to a chimney

ue pipe serving a separate solid fuel burning appliance.

• Do not use this

replace if any part has been under water. Immediately call a quali

ed service technician to inspect the

replace

and to replace any part of the control system and any gas control which has been under water.

• Do not operate the

replace with the glass door removed, cracked or broken. Replacement of the glass should be done by a

licensed or quali

ed service person.

• Do not strike or slam shut the

replace glass door.

• The glass door must be kept closed while the

replace is operating to prevent exhaust fumes containing carbon monoxide,

from entering into the home. Temperatures of the exhaust escaping through this opening can also cause the surrounding

combustible materials to overheat and catch

re.

• Only doors / optional fronts certi

ed with the unit are to be installed on the appliance.

TABLE of CONTENTS

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTE: Changes, other than editorial, are denoted by a line in the margin.

This appliance may be installed as an OEM installation in a manufactured home (USA
only) or mobile home and must be installed in accordance with the manufacturers
instructions and the Manufactured Home Construction and Safety Standard, Title 24
CFR, Part 3280 in the United States or in the Mobile Home Standard, CAN/CSA Z240
MH, Series in Canada.
This appliance is only for use with the type of gas indicated on the rating plate. This
appliance is not convertible for use with other gases, unless a certi

ed kit is used.

This appliance may be installed in an aftermarket, permanently located, manufactured
home (USA only) or mobile home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This
appliance is not convertible for use with other gases, unless a certi

ed kit is used.

FINISHING

Door Removal

Glass Removal

Frame Installation

Light Installation

OPERATING INSTRUCTIONS

MAINTENANCE

Gas Pressure Adjustment

Venturi Adjustment

REPLACEMENTS

Replacement