background image

S9 BRICK AND BAFFLE INSTALLATION INSTRUCTIONS

With appliance and chimney installation completed, move the bricks into place for your appliance as illustrated.

A.

 

Install the bottom bricks, working from the back of the appliance forward.

B.

 

Before installing the back bricks, loosen the screw holding the brick retainer and ensure that it has been moved forward. Install 
the six bricks along the back wall by pivoting the bricks up under the brick retainer. Re-tighten the screw.

C.

 Install 

the 

fi rst two rows of side bricks as shown in the illustration below. 

D.

 Pivot 

the 

fi bre baffl es into place with the brick retainer down and toward the outside of the appliance. Slide the top row of 

bricks into place to support the baffl e. The baffl e must sit fl at on the outside row of bricks as well as the fl ange on the manifold 
shield. Push the baffl e all the way to the rear of the fi rebox, leaving a minimum of 1” (25mm) gap along the front. This will allow 
fl ue gases to escape the fi rebox.

E.

 

Install the remaining bricks along the front opening, as illustrated below.

NOTE: Do not operate if baffl e and manifold shield are not in position.

NOTE: All fi rebricks are 1 1/4” (32mm) thick.

!

!

WARNING

OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE TEMPERATURES

THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING ENCLOSURE.

FIREBRICK 

DIMENSIONS

PART #

FIREBRICK 

DIMENSIONS

PART #

FIREBRICK 

DIMENSIONS

PART #

A

4 1/2” x 9” 

(114mm x 229mm)

W090-0001

X20

E

4 1/2” x 9”(Notched) 

(114mm x 229mm)

W090-0207

X1

I

2 1/2” x 4 1/2” 

(64mm x 114mm)

W090-0016

X1

B

3” x 9” (Molded)

(6mm x 229mm) 

W090-0002   

X2

F

4 1/2” x 9”(Notched)

(114mm x 229mm)

W090-0208

X1

J

1 1/2” x 4 1/2” 

(38mm x 114mm)

W090-0017

X1

C

4 1/2” x 4 1/2”

(114mm x 144mm)

W090-0003

X2

G

2 1/4” x 9” 

(57mm x 229mm)

W090-0018

X1

K

4 1/2” x 8 1/2”

(114mm x 216mm)

W090-0210

X3

D

 3” x 9” 

(76mm x 229mm)

W090-0166

X2

H

1 3/4” x 4 3/4” 

(64mm x 121mm)

W090-0216

X1

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

K

A

K

K

A

B

B

D

D

I

J

G

A

A

C

C

D

D

F

E

(Fibre Baffles)
W018-0130 X2

H

BRICK

RETAINERS

:ROI6WHHO/WG1DSROHRQ5G%DUULH21/0*&DQDGD ‡  ‡ ID[ ‡ ZZZQDSROHRQILUHSODFHVFRP

02.06.14

TO VIEW A VIDEO OF THIS INSTALLATION VISIT OUR WEBSITE AT: www.napoleonfi replaces.com/productsupport/s9

NOTE: FOR MORE DETAILED INSTRUCTIONS REFER TO YOUR INSTALLATION MANUAL.

Отзывы: