INSTALLER : THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
CERTIFIED UNDER U.S. ENVIRONMENTAL PROTECTION AGENCY (E.P.A.) JULY 1990 AND THE OREGON DEPARTMENT OF ENVIRONMENTAL QUALITY (D.E.Q.) PARTICULATE
EMISSION STANDARDS BY E.E.M.C. THESE STOVES HAVE BEEN TESTED AND LISTED BY WARNOCK HERSEY LTD. TO STANDARDS : UL 1482 / ULC-S627.
MODEL 1600C-1 HAS BEEN TESTED AND LISTED FOR INSTALLATION IN MOBILE HOMES.
INSTALLATION AND OPERATION INSTRUCTIONS FOR
LISTED SOLID FUEL BURNING SPACE HEATER
MODEL :
1600C-1
WARNING :
Please read this entire manual before you install and use your new room heater. Failure to follow
instructions may result in property damage, bodily injury, or even death.
If this stove is not properly installed, a house fire may result.
FOR YOUR SAFETY :
Follow the installation directions. This stove can be very hot when burning. Combustible materials such as firewood,
wet clothing, etc. placed too close can catch fire. Children and pets must be kept from touching the stove when it is
hot. The chimney must be sound and free of cracks. Before installing this unit, contact the local building or fire
authority and follow their guidelines.
Operate only with door tightly closed. The door must be kept closed during operation to prevent smoke, embers
from entering the room. Burn wood directly on cast grate supplied. Do not elevate the fire. An opening of at least 14
square inches (90 sq.cm.) of outside air must be admitted to the room. This stove is designed to burn natural wood
only. Higher efficiencies and lower emissions generally result when burning air dried seasoned hardwoods, as
compared to softwoods or too green or freshly cut hardwoods. Do not start a fire with chemicals or fluids such as
gasoline, engine oil, etc. Do not burn treated wood, coal, charcoal, coloured paper, cardboard, solvents or garbage
which tend to produce more pollution than wood. Do not let the stove become hot enough for any part to glow red.
KEEP THE STOVE TOP TEMPERATURE BELOW 700 °F (371 °C). Attempts to achieve heat output rates that
exceed stove design specifications can result in metal distortion and damage.
Wolf Steel Ltd., 24 Napoleon Rd.,
Barrie, ON., Canada L4M 4Y8 (705)721-1212
Fax : (705)722-6031
www.napoleonfireplaces.com
Email : [email protected]
Document
n°1
178-1
~
02/12/2004
