NanoXX 9500HD Скачать руководство пользователя страница 1

2

S

afety Instructions

English

S

afety Instructions

This product has been manufactured to satisfy the international safety standards.

Please read all of safety and operating instructions before operating the product and keep this 

manual for future reference.

MAINS SUPPLY

AC 90-250V~, 50/60Hz

Operate your product only from the type of power supply indicated on the marking label. If you 

are not sure of the type of power supplied to your home, consult your local power company. 

Disconnect the STB from the mains before you start any maintenance or installation procedures.

OVERLOADING

Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or 

shock.

LIQUIDS

The product should not be exposed to any liquids such as dripping or splashing. No objects 

filled with liquids, such as vases, should be placed on the apparatus,

CLEANING

Before cleaning, disconnect the product from the wall outlet, Use a cloth lightly dampened with 

water (no solvents) to clean the exterior.

VENTILATION

The slots on top of the product must be left uncovered to allow proper airflow to the unit. Do not 

stand the product on soft furnishings or carpets. Do not expose the product to direct sunlight, 

place it near a heater. Do not stack electronic equipment on top of the product.

ATTACHMENTS

Do not use any attachment that is recommended by the manufacturer it may cause a hazard or 

damage the product.

CONNECTION TO THE SATELLITE DISH LNB

Disconnect the product from the mains before connecting or disconnecting the cable from the 

satellite dish. Failure to do so can damage the LNB.

CONNECTION TO THE TV

Disconnect the product from the mains before connecting or disconnecting the cable from the 

satellite dish. Failure to do so can damage the TV.

LOCATION

Place the product indoors in order not to expose to lightning, rain or sunlight.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifier) that product heat.

LIGHTNING, or NOT IN USE

Unplug the product from the wall outlet and disconnect the cable during a lightning storm or 

when unused for a long time.

SERVICING

Do not attempt service that this product yourself, as opening or removing covers may expose 

you to dangerous voltage or other hazard. Refer all servicing to qualified service personnel.

“The mains plug is used as the disconnect device. Then disconnect device shall remain 

readily operable”

Содержание 9500HD
































Отзывы: