1 Introduction
the plant engineer or end user. Nanotec accepts no responsibility for the integration of the product in the end
system.
Our general terms and conditions at www.nanotec.com apply.
Customers of Nanotec Electronic US Inc. please refer to us.nanotec.com.
NOTE
Changes or modifications to the product are not permitted.
1.5 Target group and qualification
The product and this documentation are directed towards technically trained specialists staff such as:
■
Software developers
■
Development engineers
■
Installers/service personnel
■
Application engineers
Only specialists may install and commission the product. Specialist staff are persons who
■
have appropriate training and experience in working with fieldbus systems and electrostatically sensitive
components,
■
are familiar with and understand the content of this technical manual,
■
know the applicable regulations.
1.6 EU directives for product safety
The following EU directives were observed:
■
RoHS directive (2011/65/EU, 2015/863/EU)
■
EMC directive (2014/30/EU)
1.7 Numerical values
Numerical values are generally specified in decimal (dec) notation. If hexadecimal (hex) notation is used, it is
marked with 0x.
Version: 1.0.0
4
