SEV-00184-01
nCounter Pro Analysis System User Manual
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
59
Initiating a Run
1.
From the Main Menu (Figure 83) select start
counting.
The ‘Select Stage Position’ screen will appear
(Figure 84).
NOTE:
The administration button will only
appear if the user has the Enterprise Package
enabled and is logged in as an administrator
(see the
section).
2.
Select the cartridge position for which
cartridge information will be entered by
tapping that cartridge position on the screen.
The selected cartridge will appear in green. If
the wrong cartridge is selected, tap the
correct position to change your selection.
Press next.
3.
The ‘Select Cartridge Definition Mode’ screen
will appear (Figure 85).
Figure 83: The Main Menu.
Figure 84: The ‘Select Stage Position’ screen.
Figure 85: The ‘Select Cartridge Definition Mode’
screen.
Содержание nCounter Pro
Страница 1: ......
