Nanoptix PAYCHEK SLIM, Руководство пользователя

Страница: 13 / 23

979000-0000R
August 2011
7
1.5 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident test ticket. Verify this
ticket to judge the printing quality.
To print the test ticket, power-on the printer while pressing and holding the Paper Feed
Button (figure 3) for approximately 3 seconds. A test ticket similar to the one below will be
printed approximately 5 seconds later. Press the paper feed button once more and the
ticket will feed. Pressing the button again will result in blank tickets.
Figure 5: Test Ticket
Model:
PAYCHECK 3
Firmware: PAY-1.79U
Protocol: NTL
COMMUNICATION
Interface:
Serial
Baud Rate: 9600
Data Bits: 8
Parity: NONE
Handshaking: PRT+RTS
Print mode: NTL
Aux Port: Disabled
PRINT CONTROL
Print Method:
No HPQ
Speed: 150 mm/sec
Black Bar Index: Right
No HPQ Burn time: 275 us
Motor Current: 2
Real-Time Command: Enabled
Auto Reset Status: Enabled
PRINTER ENVIRONMENT CONDITIONS
Voltage:
23.8 Volts
Temperature: 24 Celcius
SYSTEM RESOURCES
FLASH: -Used:
0
-Free: 65535
LIBRARY INVENTORY
Templates: 0,1,2,3,4,5,6,7,8,9,A,B
Regions:1,2,3,4,5,6,7,8,h,9,A,B,C,D,E,F,G,I,J,K,L,N,O,P,Q,R,
S,T, U,Z,X,a,b,c,d,e,f,g,i,j,k,l,m,n,o,p,q,
Fonts:0,1,2,3,4,5,7,8,9,P,E,A,B
Graphics:
MANUFACTURING INFORMATION
Printer ID:
Date Code: ffffffff
A to D: 03b4, 020e, 01cc, 03fe
Dip Switch Config (1234) : 0000
STATUS:
*s|0|PAY-1.79U|@|@|@|H|@|P|*