720012-0000R
May 2019
9
High Speed Video Lottery Advanced Thermal
Printer
Owner’s Manual
1.7 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident test ticket. Verify this
ticket to ensure the unit is printing and operating correctly.
To print the test ticket, power-on the printer while pressing and holding the Paper Feed
Button (Figure 3) for approximately 3 seconds. A test ticket will be printed approximately 5
seconds later. Example:
When powered on, the paper feed button can also pressed and held for several seconds to print a
performance report including number of prints, errors, firmware, on time, etc…
Model:
DSP-HPQ
Firmware:
HSVL
–
5.15B
Protocol:
E-T88
COMMUNICATION
Interface:
Serial
Baud Rate:
9600
Data Bits:
8
Parity:
NONE
Handshaking:
PRT+RTS
Print Mode:
Line
Aux Port:
Disabled
PRINT CONTROL
Print Method:
No HPQ
Final Speed:
250 mm/sec
Black Bar Index:
Disabled
No HPQ Burn Time:
400 us
Cutter PWM:
80 %
Motor Current:
3
PRINTER ENVIRONMENT CONDITIONS
Voltage:
24.4 Volts
Temperature:
20 Celsius
SYSTEM RESOURCES
FLASH: -Used: 0
-Free: 24576
MANUFACTURING INFORMATION
Printer ID:
Date Code:
ffffffff
A to D: 03ca, 01e4, 01e6, 03d0
STATUS:
*S| 0
Figure 8: Testing Printer
