NANO NED 4L, Инструкция

Страница: 6 / 50

1 Safety precautions
1.1 Safety icons
Danger: Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Warning: Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Notice: Indicates a potential situation which, if not avoided, might result in property damage
or in an undesirable result or state.
Note: Indicates important information.
1.2 General safety precautions
Danger: The condensate drain is under pressure. Suddenly escaping compressed air may
result in serious injuries. Do not carry out mechanical or electrical work on the condensate
drain as long as the condensate drain is under pressure.
Danger: Touching live parts might result in serious injury or death.
Danger: There is a risk of leakage of condensate into the environment. Water spots on the
floor may be very slippery and result in serious fall injury. Water spots should be properly
removed from the floor immediately.
Danger: Exceeding the maximum allowable operating conditions may result in serious injury
or death. It is the duty of the operator to ensure that the operating pressure and temperature
fall within the values provided by the condensate drain; these values are indicated on the
identification plate.
Danger: Damages of the condensate drain may lead to unpredictable hazardous situations.
Operating a damaged condensate drain may result in serious injury or death. Never start or
operate a damaged condensate drain.
Danger: The condensate drain components are not designed to withstand any external
overloads; the condensate drain may burst due to additional pressure. Any bursts of
pressurized components may cause serious injuries and/or death. Transmission of loads or
stress into the connections of the condensate drain is not permissible.
Warning: All responsibility for any damage or injury resulting from neglecting these
precautions, or non-observance of the normal caution and care required for installation,
operation, maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
• Read the instruction book carefully.
• The operator must employ safe working practices and observe all related local work safety
requirements and regulations.
• If any of the following statements does not comply with local legislation, the stricter of the two
shall apply.
Instruction book
4 2920 7213 30