Nanni T8V.320 Скачать руководство пользователя страница 49

Страница: 49 / 98

CRUISING SPEED

A recommended engine speed is given in the

TECHNICAL

DATA

section to help you to set your cruising speed.

NOTE !

Always consider sailing conditions and load of the boat

to set the cruising speed.

Operating the engine at wide open throttle should be

avoided since it is both uncomfortable and uneconomical.

Note that operating the engine at a too low rpm for a

long period could lead among other things to increased

oil consumption.

Deposits may also form in the injection system if the

engine do not reach its nominal operating temperature

regularly. Run the engine at full throttle regularly in order

to burn off any possible deposits in the fuel system.

S07

STARTING & RUNNING

MANOEUVRING

WARNING !

Shifting at high speed can damage both the engine and

the transmission and be dangerous for passengers.

CAUTION !

On a twin engine boat, both engines should be started

during reversing manoeuvres to reduce the risk of water

ingress in the stationary engine.

Carry out the following operations for forward / reverse

manoeuvres :

Reduce engine speed to idling and, if possible, let the

boat lose most of its speed.

Move the control lever to the neutral position and

wait a few seconds.

NEUTRAL

Move the control lever into astern. Increase the

speed.

ASTERN

NEUTRAL

Содержание T8V.320



































































































Результаты поиска

Содержание T8V.320

Отзывы:

Nanni T8V.320, Руководство оператора, Страница: 49 / 98

Результаты поиска

Содержание T8V.320

Отзывы: