Nanni QMS 32T, Инструкция по эксплуатации

Страница: 11 / 26

STOP
ON / STOP START
The instrument panel allows you to start and stop the generating set, and provides you with important information
when the generating set is under operation. Check this informations regularly while operating the generating set.
Contact an authorized Nanni Diesel dealer if your generating set is equipped with instruments different than those
described in this chapter.
I
Caution! : On a soundproof generating set , the local/remote selector must be in remote position to start the
generating set using the instrument panel.
I
Caution! : If the coolant temperature rises or the oil pressure falls abnormally, the corresponding indicators will
illuminate and the generating set will stop automatically.
1. Heating. This indicator illuminates when the glow
plugs are heating the combustion chambers (if fitted on
your generating set).
2. Coolant temperature. This indicator illuminates and
an audible alarm sounds if the coolant in the cooling
circuit overheats.
3. Battery charge. This indicator illuminates when the
set is switched on. If it lights when the generating set
is running, this indicates an engine alternator charging
fault.
4. Oil pressure.
This indicator illuminates and an au-
dible alarm sounds if the oil pressure in the lubrication
circuit falls.
5. Indicator showing presence of water in fuel filter
(if fitted). This indicator illuminates when there is too
much water in the fuel filter.
6. On indicator. This indicator shows that the generat-
ing set is powered (ignition).
7. Start/Stop buttons. This component starts and
stops the generating set. The ON/STOP button switch
powers up and stops the engine. The START button
starts the genset.
8. Engine oil pressure Caution! This indicator does
not show the engine oil level. This indicator shows the
oil pressure. An audible alarm sounds and the generat-
ing set stops if the oil pressure in the lubrication circuit
falls.
9. Coolant temperature
. Indicates the coolant tem-
perature. An audible alarm sounds and the generating
set stops if the coolant in the cooling circuit overheats.
3
6
2
4
5
1
Instrument panel
1
1
Tableau Luxe GE Tableau Eco GE
8 9
7
3
6
2 4
5 1
7
Presentation