Nanfone NF-910, Руководство пользователя

Страница: 13 / 24

SK1 or Keys SK2 .Stop scanning when get a signal If want to receive another radios, short press
(FM/Monitor/FM+) or Keys SK2 again.
2. Long press (FM/Monitor/FM+) for more than 2 seconds and hear the sound” beep ,beep” means
to quit the FM.
3. Closing the FM function can be programmed by PC.
Note:
The radio can return automatically to be ready for transmitting when receiving the same
frequency signal .If set on it, radio can return and go on receiving FM after communication for 5
seconds. If not, the radio can not return automatically.
Scan Function
When activate the scan function by PC program, and turn to the Channel 16, then radio tips the
sound of “scanning”. If report “16”, it means to turn off the scan function.
Turning on the scan function and being standby ,radio would scan the signal one by one from the
present channel.
When match with same signal ,LED light would flash green and receive signals .Then you can
transmit the information by PTT .If there is no operation on the radio for 10 seconds ,it would
return to scan .
Example: When activate the scanning of Channel 3,5,7 ,radio would scan automatically when get
to Channel 16 .Once receiving the signal from anyone of channel 3,5,7,16 ,scanning would stop
and ready for transmitting .
12