N&W Global Vending Snakky RY, Руководство по установке

Страница: 7 / 52

© by N&W GLOBAL VENDING S.p.A.
3
06 2007 294-00
uSiNg thE vENdiNg machiNES foR
packagEd pRoductS
A different sale price can be set for each product se -
lection by the machine electronic control. The various
functions are programmed through the selection keypad
without any need for additional equipment.
All models are equipped with variable configuration
trays, adding or removing dividers, spirals and ratio -
motors; therefore the machine can be easily suited to
specific needs.
All trays are preset for the operation of up to 8 selections
(maximum setting).
The product compartments are equipped with independ -
ent motors and spirals; each selection will continue its
operation autonomously even if the other selections are
disconnected.
poSitioNiNg thE vENdiNg machiNE
the machine is not suitable for outdoor installation. It
must be positioned in a dry room where the temperature
remains between 5° C and 32° C, and not where water
jets are used for cleaning (e.g. in large kitchens, etc.).
To ensure correct machine operation we recommend
installing the air baffle plate / spacer (80 mm) to the back
of the machine (see fig. 2).
Warning!
incorrect ventilation may compromise the proper
functioning of the cooling unit.
The machine should be positioned with a maximum
inclination of 2°.
If necessary provide proper levelling by way of the ad -
justable feet included.
Fig. 2
Securing holes 1-
Spacer 2-
Fastening screws 3-
WaRNiNg foR iNStallatioN
the machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use
of the machine according to the standards in force.
The machine is sold without payment system, therefore
the installer of such a system is responsible for any dam -
age to the machine or to things and persons caused by
faulty installation.
the integrity of the vending machine and its con-
formity with the rules and regulations in force for
its relevant systems must be checked by qualified
personnel at least once a year.
pREcautioNS iN uSiNg thE machiNE
The following precautions will assist in protecting the
environment:
use biodegradable products only to clean the machine;
-
adequately dispose of all containers of the products
-
used for loading and cleaning the machine;
keep the machine away from heat sources;
-
regularly check the condition of the door seal to limit
-
any heat dispersion;
limit as much as possible door opening time during
-
loading operations to avoid temperature increase inside
the cabinet and subsequent power consumption.
WaRNiNg foR ScRappiNg
This symbol indicates that the machine may not
be disposed of as ordinary waste; it must be
disposed of in accordance with the provisions
of the European directive 2002/96/CE (Waste
Electrical and Electronic Equipment - WEEE) and of any
resulting national laws, for preventing any possible nega -
tive consequences to the environment and to health.
For correct disposal of the machine, contact the dealer
from whom you have purchased the machine or our
after-sales service.
Warning !!!
the heat insulation material of the cabinet and the oil
present in the refrigerant circuit are harmful for the envi -
ronment and therefore must be recovered by specialised
companies.